Simple Steps To Install A Bathroom Vanity

On selection of vanity type ,if you choose vanity Freestanding vanities that are a logical choice when you’re remodeling a bathroom And Dovau bathrooms provides several installation steps is easier than a wall hung (floating)vanity, because it’s not necessary to provide structural support to the vanity. It is important, however, to secure the vanity to the wall so it doesn’t move once the plumbing is connected. Ensuring you have a sturdy and strong connection will take only a few moments and shouldn’t be neglected as you complete your job.

1. Place the vanity in position against the wall. Open the doors underneath the vanity. Look along the upper back wall for several pre-drilled screw holes. Mark the position of the screw holes onto the wall with a pencil. Move the vanity back out from the wall.
2. Drill a hole in each of the marked locations. Insert a hollow wall anchor into the wall at each of the spots you’ve drilled.
3. Slide the vanity back in place. Insert a screw in each of the vanity’s screw holes. Tighten the screws until they catch the wall anchors, then tighten them until the screw heads are tight against the back inside of the vanity.